Retro flap TV (hand crank)

A little retro TV with a 20-picture split-flap screen. Turn the crank on the right side and the next picture flips down, one ratchet click each. Turn the knob and the rabbit ears wave, about 24 degrees each way. No electronics, no screws, no glue. Everything snaps or presses together. I designed it in code and print it without supports on my Bambu P1S, in PLA. It measures 100 x 98 x 71 mm. Colours: - Red: fire red cabinet, yellow inside, yellow knob and crank (default) - Toy yellow: yellow cabinet, red inside, red knob and crank - Tuxedo: black cabinet with a white screen frame, white inside, red knob and crank Kit or assembled: The kit is all the printed parts: cabinet, chassis, spool, ratchet, shafts, antenna, knob, crank and the 20 picture flaps. It goes together in 8 steps with no tools. The 3D assembly guide is sent as a link by email. If you get it assembled, it's put together and checked before it ships.